NU-560-601EF10 LABGARD ES TE NU-560-600E Nuaire Class II Type B2 Biosafety Cabinet

The NU-560 combines durable construction and an efficient motor with a control system providing the safety and monitoring appropriate for the demanding work done in a Class II Type B2 biological safety cabinet.

0 People watching this product now!

Overview

The NU-560 biological safety cabinet uses a DC ECM motor that economizes energy while evenly distributing laminar downflow air through a flexible plenum and retaining enough power to overcome supply HEPA filter loading and minimize filter changes. This cabinet’s construction provides the user with a work zone whose side and back walls are constructed from a single piece of stainless steel for enhanced containment and easy cleanability. The LED bulbs efficiently illuminate the procedure inside while a single-piece dished work tray traps most spills above it but includes a prop rod to allow cleaning underneath. An outlet is placed on the left front faring and a cord-pass through is built into the right sidewall for the user’s convenience. The exhaust is powered by an external facility blower that is interlocked with the cabinet’s own motor through a redundant system to provide two layers of protection that minimize the risk of blowing air out of the cabinet should the external blower fail: cabinet exhaust is monitored by not only a mechanical pressure switch but also a differential velocity pressure flow grid. A touch screen displays the readings from both this flow grid and a down flow sensor in the work zone at all times for the cabinet operator. Models are available that meet the commonly respected NSF/ANSI 49 standard for biosafety cabinets.

TouchLink Control System

The airflow dynamics in an externally exhausted type B2 cabinet need to work in constant harmony. The TouchLink control system displays inflow velocity, downflow velocity, and exhaust volume on a single, easy to read front screen. The digital control system interlocks the downflow blower with the external exhaust to shut down the motor if an exhaust failure occurs—a safeguard that is further backed up by a mechanical pressure switch.

TouchLink Electronic Control System for Class II, Type B2 Biosafety Cabinets

Digital Exhaust Flow Grid

The digital differential velocity pressure flow monitors exhaust to enable the TouchLink to derive not only inflow velocity but also the critical parameter of exhaust volume for display to the cabinet operator.

Digital exhaust flow grid for Class II, Type B Biosafety Cabinets

Downflow Air Sensor

The downflow sensor measures velocity inside the work zone and passes the data to the TouchLink display to assure users of product protection, a critical aspect in many pharmaceutical and biotechnology applications.

Biosafety Cabinet downflow thermistor airflow sensor.

Performance History

The TouchLink control panel showcases a week’s worth of cabinet performance data on-screen, while also facilitating the download of a full month’s operational history to a USB. This feature is essential for procedures requiring documented airflow conditions in compliance with Good Manufacturing Practice (GMP) standards.

Biosafety Cabinet historical performance graph on TouchLink Control System

Airflow Control Options	Air Supply On/Off (Requires NU-952-012), Cabinet Off Override, Delay Off Exhaust Airflow, Exhaust Airflow Loss Override
Blower Contact Wires	N/A
Closure Panels	Optional Rear Closure Panels for Seismic Brackets
Cord Pass Through	Standard Right
Gas Supply Interlock with Blower	N/A
Glass Sidewalls	N/A
IV Bar with 6 Hooks	Optional
Motorized Base Stand	Optional as Separate Accessory
Motorized Window	N/A
Other Built-in Supply Filter Option(s)	N/A
Outlet(s)	One Left Front Faring, Optional One Right Front Faring
Plumbing	Optional 3/8" Soft Copper, 3/8" Black Pipe (Gas Only), or 1/2" Rigid Copper
Remote Service Valves	Maximum of Three Each Side Wall Optional
Seismic Brackets or Studs	Optional Rear or Floor Mount Seismic Brackets
Service Couplings (3/8-inch NPT)	Two Couplings on Left Side Wall and One on Right Side Wall are Standard, Maximum of Three Each Side Wall Optional
Service Valves (3/8-inch NPT)	One Valve on Right Side Wall is Standard, Maximum of Three Each Side Wall Optional
Side Panels	Optional with Plumbing out Bottom, Top or Back
Smooth Interior	N/A
Ultraviolet (UV) Light	Optional
Window Edge Protector	Optional

Access Opening Glass Type	Tempered Glass
Cabinet Construction	All welded stainless steel 16/18 GA, Type 304 pressure tight design
Casters	N/A
Decontamination Seal-able Window	N/A
Diffuser	Metal, non-flammable
Drain Valve Location	Front right
Exhaust Filter	11 1/2-inch (292 mm) 99.99% Efficiency on 0.3 Microns
Front & Control Panel Material	Painted Steel
HEPA Filter Seal Type	HEPEX Zero Leak Neoprene Seal, Spring-loaded
Lighting	LED
Main Cabinet Wrap	Single Piece Stainless Steel Side and Back Wall Construction
Motor(s)	1/2 HP DC ECM
Plenum Type	HEPEX
Pre-filter	N/A
Style	Bench top, optional base stand
Supply Filter	3-inch (76mm) 99.99% Efficiency on 0.3 microns
Viewing Window Inches (mm)	18.5 (470) open to fully closed
Work Access Opening(s)	8-inch (203mm)
Work Surface	One-Piece Dished Stainless Steel with Prop-Up Rod
Work Zone Wrap	Single Piece Stainless Steel Side and Back Wall Construction

Data Output Features	RS-232, USB
Remote Alarm Terminals	Standard

Est. Shipping Depth Inches (mm)	43 (1092)
Est. Shipping Height Inches (mm)	73 (1854)
Est. Shipping Width Inches (mm)	82 (2083)
Exterior Depth with Armrest Removed Inches (mm)	32 3/8 (823)
Exterior Height (Minimum for Transport) Inches (mm)	62 (1575)
Exterior Height Inches (mm)	62 (1575)
Exterior Height with 30-inch (762 mm) Work Surface Height inches (mm)	88 1/2 (2248)
Exterior Height with 36-inch (915 mm) Work Surface Height inches (mm)	94 1/2 (2401)
Exterior Width Inches (mm)	77 5/8 (1972)
Nominal Width Feet (Meters)	6 ft. (1.2m)
Useable Work Tray Area Depth Inches (mm)	20 7/8 (530)
Useable Work Tray Area Width Inches (mm)	69 7/8 (1775)
Work Area Depth Measured at 8-inches (203 mm) Window Height Inches (mm)	26 (660)
Work Area Height Inches (mm)	25 3/16 (640)
Work Area Width Inches (mm)	70 3/8 (1788)

Blower/Lights Amps	1.3
Electrical Configuration	230V5060Hz
Junction Box	Optional
Outlet Amps	3
Power Cord	14 GA - 3 Wire, 16A
Power Cord Length Foot (Meter)	12 (3.7)
Rated Amps	7

Light Intensity fc (Lux)	90-120 (968-1291)
Reach into workzone Inches (mm)	6 (152)
Sound Pressure Level per ISO 4871	Inquire

Bag In Bag Out	Optional
Direct Connection Exhaust Requirement Concurrent Balance Value, CFM(CMH)	1275 (2166)
Other Built-in Exhaust Option(s)	N/A
Plant Duct Static Pressure Inches (mm)	1.8 w.g. (46mm w.g.)

Performance Standard	NSF-ANSI-49
Safety Certification

Air Cleanliness (ISO 14644)	ISO-Class-5
Downflow fpm (m/s)	60 fpm (0.30 m/s)
Fumigation: per NIH/NSF Procedures	True
Heat Rejected (BTU/Hour)	584
Inflow fpm (m/s)	105 fpm (0.53 m/s)
Protection	Product, Personnel, Environmental

Airflow Monitor	AirflowSensorPressureGrid
Control System	TouchLink

Est. Shipping Weight lbs (kg)	730 (331)
Net Weight lbs (kg)	680 (308)

NU-560-601EF10 LABGARD ES TE NU-560-600E Nuaire Class II Type B2 Biosafety Cabinet

NU-560-601EF10

LABGARD ES TE

NU-560-600E

Nuaire

Class II Type B2 Biosafety Cabinet