AR2008 A.KRÜSS Optronic GmbH Digital Abbe refractometer
The AR2008 determines the refractive index between nD 1.3000–1.7200 and the sugar content in the range of 0–95 %Brix of liquid, viscous as well as solid samples. The output of the measurement results is performed digitally. The refractive index of the Brix value is shown on the LED display together with the temperature.
DR6100-T A.KRÜSS Optronic GmbH Digital refractometers with Peltier temperature control
Powerful all-rounder: the DR6000-T
As a standard, the refractometer models DR6000-T and DR6000-TF are equipped with a Peltier element that controls the temperature of the sample up to 80 °C. There are four different models available for different requirements on accuracy, resolution and measurement range whereby you can access the same operation and functionality.
DS7800-3 A.KRÜSS Optronic GmbH Density meters for semi-automatic sample supply Set 3
High efficiency and special suitability for hazardous substances
In case of low-viscous to slightly viscous samples, it is possible to perform a semi-automatic sample supply and cleaning of the U-tube oscillator using a peristaltic pump. This means higher efficiency and more safety if aggressive or harmful substances are analysed. It also improves the reproducibilityof the measurement results.
M3000 A.KRÜSS Optronic GmbH Melting Point Meter for Semi-Automatic Measurements
Semi-automatic measurement using 10x observation optics
The M3000 provides fast and easy examination of powdery substances with a melting point up to 360 °C. Due to the triple capillary intake, it is possible to analyse three samples within one measurement run. Thanks to the preheating rate and the integrated fan cooling, fast measurements are possible in any temperature range. The display provides a wellarranged readout of all important measuring data.
M5000 A.KRÜSS Optronic GmbH Melting Point Meter for Automatic Measurements
Fully automatic measurements
The M5000 provides fast, easy and automatic examination of powdery substances with a melting point up to 400 °C. Due to the automatic determination of the melting point, an objective measurement result is always guaranteed. The high preheating rate and the integrated fan cooling allow fast and reliable measurements in any temperature range. The display provides a well-arranged readout of all important measuring data.
MAT1500 A.KRÜSS Optronic GmbH Gas Analyzer for O2 and CO2 Concentration
The all-rounder
Fitted with a zirconium dioxide sensor and a nondispersive infrared sensor, the MAT1500 is our number one when it comes to the range of application, performance and precision. The measurements are completed within only approx. ten seconds. As is the case with the MAT1400, highly precise results can be achieved with single measurements of oxygen concentrations thanks to the min/max detection even if only a small sample volume is available.
P3000 A.KRÜSS Optronic GmbH Polarimeter for Standard Applications
Good performance at an attractive price
The polarimeter P3000 is the economical solution for standard applications for which a measurement accuracy of ±0.01° is sufficient. It performs its tasks in the record measurement time of approx. 1 s that you are familiar with from our digital polarimeters. The measured values are optionally displayed as an optical angle of rotation or on the international sugar scale of the ICUMSA. If desired, they can be printed on a serial ASCII printer. Thanks to the reliable temperature compensation, it is possible to measure at any temperature specified in the ICUMSA; the results will then be converted to the value for 20 °C.
P8000 A.KRÜSS Optronic GmbH Polarimeters without temperature control
Compact polarimeter with proven features
The polarimeter models P8000 and P8100 are the right choice for all applications where sample temperature control for high-precision measurements is not absolutely necessary. The devices are suitable for nearly all samples as the parts that come in contact with the sample are chemical resistant. The P8000 and P8100 are recommended for all basic applications. Instead of a temperature control, the temperature can be compensated according to ICUMSA. That allows you to take measurements at any temperature; the results will then be converted to the desired temperature. In addition, the international sugar scale has been predefined on our devices, and the initial weight is taken into account for the conversion into the specific rotation.
