Our Analytical Sales Team

Kustono

Sales Manager of Analytical Department

Product Manager of Hanon, Kruss, Labfreez, Shashin Kagaku.

Whatsapp

Andy

Product Manager of Thermo Fisher Scientific

Woro

Product Manager of Dickson, Funke Gerber, Interscience, Sartorius.

Richard

Product Manager of Adrona, KNF, Lamy Rheology, Optika, PG Instrument, Powteq.

Dian

Product Manager of Denovix, Ecosafe, Heal Force.

Analytical Laboratory Equipment

Heal Force X960 Fully Automatic Medical PCR Analysis System

The X960 real-time PCR system is high performance benchtop instrument giving you greater control of your experiment data. It delivers reliability, sensitivity, and accuracy, which is optimized to enable the broadest range of quantitative PCR applications.

24.875.0002 MG200 Powteq Mortar Grinder

Automatic laboratory mortar grinder MG200 occupies an important post on sample preparation in laboratory. MG200 replaces the traditional manual grinding, time, speed and other parameters can be set, and the whole process is automatic.The gap between mortar and pestle, mill’s pressure and the angle of scraper are all adjustable. This mill is suitable for the fine grinding of any dry samples, as well as for suspensions with different consistencies.

MAT1500 A.KRÜSS Optronic GmbH Gas Analyzer for O2 and CO2 Concentration

The all-rounder

Fitted with a zirconium dioxide sensor and a nondispersive infrared sensor, the MAT1500 is our number one when it comes to the range of application, performance and precision. The measurements are completed within only approx. ten seconds. As is the case with the MAT1400,  highly precise results can be achieved with single measurements of oxygen concentrations thanks to the min/max detection even if only a small sample volume is available.

Hanon Automatic Kjeldahl Analyzer K1100F

Hanon K1100F Automatic Kjeldahl Analyzer is an automatic device integrating distillation and titration functionsand it is designed based on classic Kjeldahl nitrogen determination method. It's equipped with the latest core control system, powerful automation and high-quality components; can easily achieve automatic waste discharge and cleaning of digestion tubes and titration cups, control steam supply and real-time detection of condensation temperature. High-accuracy charging pump and titration system ensure test results accuracy, and multiple fluid level detection gives smooth test process.

K9840 Hanon Kjeldahl Distillation Unit

Hanon K9840 Auto Kjeldahl Distillation Unit is designed to determine the nitrogen content of samples based on the Kjeldahl nitrogen determination method. Fully intelligent software is able to complete sample distillation within minutes, boasts automatic regent quantification and filling, automatic test. The distillation and condensation automatic cleaning system further enhances measurement precision; explicit interface is easy for operation. It is widely used in food processing, feed production, tobacco, livestock, soil fertility, environmental monitoring, medicine, agriculture, scientific research, teaching, quality control and other fields for the test of nitrogen or protein content, can also be used for the test of ammonium, volatile fatty acid/ alkali, and so on.

Laboport® N 840.3 FT.18 KNF Diaphragm Vacuum Pump

Chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. Especially suited for handling aggressive vapors, it features a PTFE head, PTFE-coated diaphragm and FFPM valves.

T85 PG Instruments Double Beam Spectrophotometers

The T85 is a high performance Double Beam Spectrophotometer available with a fixed (1.8nm) or variable (0.5, 1, 2, 4nm) Bandwidth which is innovative in terms of instrument application, mechanical and optical design, electronic control and software whilst retaining features that are established and accepted through the industrument The T85 UV-Visible Spectrophotometer is able to carry out photometric measurement, spectrum scans, quantitative determination, multi-wavelength analysis, Kinetic scans and DNA/Protein analysis using the sensitive built in touch screen.

24.890.0001 GT300 Powteq High Energy Ball Mill

high energy ball mill GT300 has a pair of symmetrical swing arms with high speed and large amplitude. It can grind, crush, mix and break the sample easily within a few seconds to several minutes by randomly bumping and rubbing the small ball or stainless steel bead to and fro in the sample tube.Fine grinding, up to 5 microns.

24.904.0004 BP40 Powteq Automatic Pellet Press

Stable and qualified tablet is important precondition to XRF analysis. Pellet press instrument is widely applied to NIR and ICP analysis pretreatment as well. Automatic pellet press BP40 provides strong tablets with smooth surface. Pressure can be adjusted and different size of steel rings are optional according to application.

DR6100-T A.KRÜSS Optronic GmbH Digital refractometers with Peltier temperature control

Powerful all-rounder: the DR6000-T

As a standard, the refractometer models DR6000-T and DR6000-TF are equipped with a Peltier element that controls the temperature of the sample up to 80 °C. There are four different models available for diŽfferent requirements on accuracy, resolution and measurement range whereby you can access the same operation and functionality.

436300 Scan 300 Interscience Automatic Colony Counter Essential Features

436300 Scan 300 Interscience Automatic Colony Counter Essential Features
Scan 300 is an automatic colony counter that includes the essential features for Petri dish counting. It is specifically adapted to the usual media in food microbiology: PCA, MRS...

Hanon SH520/SH508 Automatic Kjeldahl Digestor

Hanon SH520/SH508 Automatic Kjeldahl Digestor is fully automatic digestor adhering to the design concept of "reliable, intelligent and environmentally friendly", which can automatically complete the digestion process base on Kjeldahl method experiments. SH508/SH520 can be matched with 8 positions or 20 positions according to the number of laboratory samples. At the same time, it adopts an Android system, and the host is combined with a lifting device and scrubber to realize the automation of the entire digestion process.  

503 201 (double pump) DiluFlow Elite 1 kg Interscience Gravimetric Dilutor 1 kg Designed for Pharmaceutics and Cosmetics

503 201 (double pump) DiluFlow Elite 1 kg Interscience Gravimetric Dilutor 1 kg Designed for Pharmaceutics and Cosmetics The DiluFlow Elite automatically dilutes a solid sample in seconds, with the appropriate weight of diluent, up to a total weight of 1000 g. It offers the best solution to prepare your samples in the pharmaceutical and cosmetic industries, as well as animal health. Its full traceability enables the recording of all operations.

24.877.0001 HM100 Powteq Knife Mill For Lab Grinding

HM100 grinder is specially designed for lab use. It can provide quite high-level homogenization of the sample within 30 seconds, and the standard deviation of the analysis result for the sample is much lower than that use the household agitator.

N151100 TX-700 Lamy Rheology Texture Analyzer – 100N

With its wide range of probes and cells, the TX-700 is the ideal tool for your texture analysis. Thanks to its touch screen directly displaying the curves, its method programming capability, storage and analysis of measurements, the TX-700 will integrate in laboratory and production area.

M3000 A.KRÜSS Optronic GmbH Melting Point Meter for Semi-Automatic Measurements

Semi-automatic measurement using 10x observation optics

The M3000 provides fast and easy examination of powdery substances with a melting point up to 360 °C. Due to the triple capillary intake, it is possible to analyse three samples within one measurement run. Thanks to the preheating rate and the integrated fan cooling, fast measurements are possible in any temperature range. The display provides a wellarranged readout of all important measuring data.

CE30-1101 E30 HPLC Adrona Water Purification System

E30 water purification system produce ultrapure and pure water for laboratory needs. It is designed for maximum convenience of use and have maximum features. Color graphic LCD display provides clear readout of water quality, system component status, performance of the polishing module. System component status is reflected on the display in an intuitive color pattern. E30 has an excellent price/performance ratio and low operation costs. There are 3 configurations available: E30 Trace, E30 HPLC and E30 Bio.

320 200 Anabac Poma Interscience Autoclave Deodorant Apple Fragrance

320 200 Anabac Poma Interscience Autoclave Deodorant Apple Fragrance Laboratories are very concerned about hygiene, cleanliness and comfort of work. Try Anabac®, autoclave deodorant, for a perfumed touch in your lab. Anabac® autoclave deodorant bring the discrete final touch, the refinement of cleanliness.
 

24.910.0001 BM20 Powteq Planetary Ball Mill

Planetary Ball Mill BM20 is suitable for grinding(dry\wet) and mixing some soft,hard,brittle and fibrous samples ,which are used wherever the highest degree of fineness as customer required,as well as the grinding result is reproduc- ible. Apart from the classical mixing and size reduction processes,the mills also meet all the technical requirements for colloidal grinding.

FD-12-MR Labfreez Lab Small Freeze Dryer, 4kg/24 hours, 0.08~0.12 m2

FD-12 Freeze Dryer/lyophilizer is applicable for freezedrying test of laboratory samples and suitable for small amount of production.

3680 Funke Gerber Super Vario N Centrifuge

Centrifuge for the determination of fat according to Gerber, Röse-Gottlieb, Babcock and for the determination of the solubility of milk powder (ADPI)

AR2008 A.KRÜSS Optronic GmbH Digital Abbe refractometer

The AR2008 determines the refractive index between nD 1.3000–1.7200 and the sugar content in the range of 0–95 %Brix of liquid, viscous as well as solid samples. The output of the measurement results is performed digitally. The refractive index of the Brix value is shown on the LED display together with the temperature.

Ecosafe AL155 1-DOOR LARGE SHEET STEEL SAFETY CABINET

Due to obvious reasons of safety (fire, explosion, corrosion, intoxication) dangerous chemicals, whatever they may be must be handled and stored extremely carefully.

Liquiport® NF 100 KT.18S KNF Diapraghm Liquid Transfer Pump

Chemically resistant liquid transfer diaphragm pump. Offers wetted material combinations for optimal chemical resistance. Manual control of flow rate with LED indicator.

P3000 A.KRÜSS Optronic GmbH Polarimeter for Standard Applications

Good performance at an attractive price

The polarimeter P3000 is the economical solution for standard applications for which a measurement accuracy of ±0.01° is sufficient. It performs its tasks in the record measurement time of approx. 1 s that you are familiar with from our digital polarimeters. The measured values are optionally displayed as an optical angle of rotation or on the international sugar scale of the ICUMSA. If desired, they can be printed on a serial ASCII printer. Thanks to the reliable temperature compensation, it is possible to measure at any temperature specified in the ICUMSA; the results will then be converted to the value for 20 °C.

DS7800-3 A.KRÜSS Optronic GmbH Density meters for semi-automatic sample supply Set 3

High efficiency and special suitability for hazardous substances

In case of low-viscous to slightly viscous samples, it is possible to perform a semi-automatic sample supply and cleaning of the U-tube oscillator using a peristaltic pump. This means higher efficiency and more safety if aggressive or harmful substances are analysed. It also improves the reproducibilityof the measurement results.

24.887.0001 SS2000 Powteq Vibratory Sieve Shaker

Sieving Shaker SS2000 is used to batch analyses the particle size and distribution of the soft, medium -hard, hard and brittle sample within a short time. The result is accurate and repeatable.Most parameters can be digital preset to perform dry sieving and wet sieving for samples.

24.906.0001 TW200 Powteq Twister

TW200 is specially designed for the NIR(near infrared spectroscopy)analysis of food and feed sample preparation. The special design of the rotary knife, grinding chamber and grinding sieve ensures the sample is not affected by the heat and achieve good grinding effect. The application of the cyclone technique enables the results of the NIR sample preparation more reproducible and reliable.

AR4 A.KRÜSS Optronic GmbH Abbe refractometer

The AR4 determines the refractive index between nD 1.3000–1.7200 and the sugar content in the range of 0–95 %Brix of liquid, viscous as well as solid samples.

B-290TB Optika Digital Microscope with Camera & Tablet

B-290TB includes a 3MP camera with a 10.1” Windows tablet. View, capture, analyze and share your images with simplicity and reliability
 

N600300 B-One Plus LR Viscometer with Spindles Lv-1 to Lv-4 (with standard stand) Lamy Rheology

Intuitive and powerful, the new B-ONE PLUS will surprise you with its extended measuring range in LR version or with its optional temperature sensor.

24.881.0001 FM200 Powteq Ultra Centrifugal Mill

Ultra Centrifugal Mill FM200 applies to a wide range of samples. Based on its high efficiency grinding technology and rich accessories, with secondary grinding of rotating knife – ring sieve system ,it can process dry grinding and frozen ground in a very short time for the soft, hard, brittle, fibrous samples.

SLX-3 Optika Cordless Trinocular Stereozoom Microscope

Valuable configurations of cordless and modern stereo & stereozoom microscopes ideal for a variety of applications, including dissection, biology, entomology, anatomy, chemistry, material science among the others and even industrial purposes. Provided with dual magnification or 6.43:1 zoom ratioFN 21 high eyepoint eyepieces, high-grade precise fixed arm with focus and handle with the latest technology of EcoLED™ illumination plus rechargeable batteries (not included). Slim and easy to carry, all the models with high-grade precise fixed arm are equipped with long lasting LED illumination to provide over 20 years of use.
 

P8000 A.KRÜSS Optronic GmbH Polarimeters without temperature control

Compact polarimeter with proven features

The polarimeter models P8000 and P8100 are the right choice for all applications where sample temperature control for high-precision measurements is not absolutely necessary. The devices are suitable for nearly all samples as the parts that come in contact with the sample are chemical resistant. The P8000 and P8100 are recommended for all basic applications. Instead of a temperature control, the temperature can be compensated according to ICUMSA. That allows you to take measurements at any temperature; the results will then be converted to the desired temperature. In addition, the international sugar scale has been predefined on our devices, and the initial weight is taken into account for the conversion into the specific rotation.

Laboport® N 86 KT.18 KNF Mini Diaphragm Vacuum Pump

Chemically resistant, oil-free diaphragm vacuum pump used for a wide range of laboratory applications. It features a PPS head, PTFE-coated diaphragm and FFPM valves.

561 000 FlexiPump Interscience Dispensing Pump for Culture Media Preparation

561 000 FlexiPump Interscience Dispensing Pump for Culture Media Preparation FlexiPump is a peristaltic pump with enhanced accuracy for the dispensing of culture media, agar and any type of diluent. Compact and ergonomic, it comes with a user-friendly interface.

SH220F Hanon Kjeldahl Graphite Digester

Hanon SH220F graphite digestor has the advantages of fast, efficient and convenient digestion. It is suitable for food, pharmaceutical, agricultural and other industries, as well as universities and scientific research departments to digest soil, feed and other samples before chemical analysis.  

320 300 Anabac Citrus Interscience Autoclave Deodorant Lemon fragrance

Anabac Citrus dissolves during an autoclaving destruction cycle. The capsule melts completely without leaving residues and eliminates the unpleasant odors that can emerge from the autoclave. During and after the process, Anabac refreshes and perfumes the air in the room in which the autoclave is located. It is biodegradable. Anabac Citrus is compatible with all autoclaves and does not affect the autoclaving process.

Optika Stereomicroscopes SLX-3

Head: Trinocular (split ratio: 50/50), 45° inclined; 360° rotating. Dioptric adjustment: Both eyepieces. Eyepieces: WF10x/21 mm, high eyepoint, secured by screw and with rubber cups. Objective: Parfocal achromatic zoom 0.7x…4.5x (6.43:1 ratio) with anti-fungus treatment. Working distance: 100 mm. Stand: High-grade, precision fixed with handle and focus. Focusing: Rack and pinion focusing mechanism. Illumination: EcoLED™ swiveling incident and transmitted, with brightness control, rechargeable batteries. Color temperature: 6,300 K.  Multi-plug 100-240Vac/5Vdc external power supply.

ThermoFisher microPHAZIR™ RX Analyzer Handheld NIR for Pharmaceutical Raw Material Identification Catalog number : MICROPHAZIRRX

Take the power of NIR spectroscopy out of the laboratory and into the warehouse. Pharmaceutical analysis for raw material identification is a critical step in quality assurance that has tremendous impact on customer safety and speed and cost of production.

022 230 BagMixer 400 W Interscience for Microbiology

The BagMixer 400 W efficiently blends any type of sample, avoiding risk of cross-contamination. It is adapted to all types of applications and compatible with all blender bags. The window door enables a quick check-up of the blending, in process.

24.892.0001 LM200 Powteq CryoGrinder

CryoGrinder LM200 With the rapid development of science and technology, DNA detection and polymer analysis are becoming more and more important. In order to maintain the original components and biological information of sam- ples, it is necessary to adopt low-temperature pulverization. CryoGrinder LM200 chills the sample in liquid nitrogen and pulverize them with a magnetically driven impactor. The sample become brittle and the vola- tile components are preserved under the low temperature, so that a good grinding effect can be achieved. The automatic control function of liquid nitrogen content avoids the contact and danger of manual opera-tion.

MP450 Hanon Auto Melting Point Apparatus

MP450 Automatic Video Melting Point Apparatus, perfectly integrate video technology into melting point measuring.

N100009 RM 100 Plus Lamy Rheology Viscometer (with rack stand)

The RM100 PLUS is the viscometer with largest speed and torque range available on market. Create your methods and store your results in relation with your application.

SD-18A Lab Freez Mini Spray Dryer, Lab Bench-top machine, with bag filter, 1~25um

SD-18A mini spray dryer is out most advance freeze dryer, adoptered famous brand components, excellent worksship, second-generation human operation interface, it is our best mini spray dryer.

QF-4203 Q-Front EDI HPLC Adrona Water Purification System

Q-Front EDI is an excellent choice for your laboratory, providing both Grade 1 and Grade 2 water directly from tap water. Adrona’s product Q-Front EDI is a tap water system for general laboratory applications and inorganic analytical methods. Q-Front EDI systems are intended for use in laboratories with high daily pure and ultrapure water consumption. Like the other Adrona water purification systems, Q-Front EDI is available in Trace, HPLC and Bio configurations to meet the specific needs of every laboratory and application.

SOX406 Hanon Fat Analyzer Soxhlet Extraction

SOX406 Fat Analyzer is based on the Soxhlet extraction principle and integrates such functions as soaking, extraction, leaching, heating, condensation, and solvent recovery. It features sealed metal bath heating with automatic temperature control, ensuring uniform heating and safe operation; six samples can be tested at the same time, and optimal temperature can be selected according to the difference between reagent boiling point and ambient temperature to achieve quick analysis; reagents can also be recycled to reduce test cost; and soaking, extraction and solvent recovery can be done in one step. Therefore, this device is characterized by reasonable design, stable performance, good reproducibility, high accuracy, easy operation, saving time and effort, and so on.

M5000 A.KRÜSS Optronic GmbH Melting Point Meter for Automatic Measurements

Fully automatic measurements

The M5000 provides fast, easy and automatic examination of powdery substances with a melting point up to 400 °C. Due to the automatic determination of the melting point, an objective measurement result is always guaranteed. The high preheating rate and the integrated fan cooling allow fast and reliable measurements in any temperature range. The display provides a well-arranged readout of all important measuring data.

01.881.0001 VF200 Powteq Vibratory Feeder Laboratory Sample Feeder

Vibratory Feeder VF200 is designed to facilitate automatic sample feed for bulk particle or fine powder samples. It can be used in conjunction with the Sample Divider RSD200 and Ultra Centrifugal Mill FM200 produced by POWTEQ Company.

PT31 A.KRÜSS Optronic GmbH Circulation thermostat Temperature range 8-35 °C

The smallest circulation thermostat on the market

The PT31 circulation thermostat is equipped with highperformance functions. The 1.5 kg lightweight device is ideally suited for applications requiring a temperature range at a constant level. The proven Peltier technology offers process-reliable temperature control in the range from 8 °C to 35 °C. The accuracy of temperature control is ±0.2 °C.